The off-road motorcycle shock absorbers produced by Chongqing Manote Technology Co., Ltd. can effectively absorb shocks and vibrations from the road surface, ensuring a smooth and safe ride. When using off-road motorcycle shock absorbers, the following precautions should be noted:

I. Installation and Debugging

Ensure the shock absorber is correctly installed and follow the manufacturer's installation instructions. During installation, pay attention to whether the connection between the shock absorber, the frame, and the wheels is firm to prevent loosening or misalignment. After installation, perform debugging to ensure the shock absorber is functioning properly.

II. Maintenance and Care

Regularly check the oil level and sealing of the shock absorber to ensure it is in good working condition. If the oil level is too low or the seal is poor, add lubricating oil or replace the seals in time. In addition, check the springs and pistons inside the shock absorber to ensure that they are not worn or damaged.

III. Correct Use

Avoid using the shock absorber under extreme conditions, such as high temperature, low temperature, and high altitude environments. These conditions may affect the performance and service life of the shock absorber. At the same time, avoid impacting and squeezing the shock absorber during driving to prevent damage to the internal components of the shock absorber.

IV. Replacement and Upgrade

When the shock absorber performance decreases or is damaged, it should be replaced in time. Choose a shock absorber that matches the original vehicle and is of reliable quality for replacement. If necessary, you can choose to upgrade the shock absorber according to your actual needs and budget to improve the performance of the off-road motorcycle.

V. Detailed Precautions

1. Off-road motorcycle shock absorbers are not omnipotent and cannot completely eliminate shocks and vibrations from the road surface. Therefore, cautious driving is still required during use, and high-risk operations should be avoided.
2. The heat generated during the operation of the off-road motorcycle will affect the performance of the shock absorber. Therefore, pay attention to the temperature changes of the shock absorber during driving to avoid performance degradation due to overheating.
3. Different brands and models of off-road motorcycle shock absorbers may have differences, and the usage and maintenance methods may also be different. Therefore, be sure to carefully read the instructions before use and follow the manufacturer's recommendations.

Chongqing Manote Technology Co., Ltd. recommends that you pay attention to the above matters during use to ensure its performance and service life.